Motorman Licom Grease-3
Motorman Licom Grease-3
These are lithium complex soap based greases with very high structural and oxidation stability. They
possess excellent Shear stability, High load carrying capacity, High oxidation stability and Corrosion
protection. These greases prevent welding & seizure of moving parts often caused by shock loading &
water washout. These greases are recommended for Extra Heavy Duty wheel bearings in commercial
vehicles like trailers, trucks, buses, tankers, off highway transport vehicles, mining dozers where
extended service life and long service interval up to 70000km is required. These greases are also
recommended in earth moving equipment, gear coupling, electric motor, general industrial machinery, U
joints, ling pins, fifth wheels and bucket pins. These greases pass EMCOR antirust test for (IP 220)- zero
rating and possess high Weld Load characteristics, up to 280kg as per IP 239.
| Properties | Licom-3 |
| NLGI Grade | 3 |
| Appearance/Structure | Shiny, Smooth & Slightly Tacky |
| Soap Type | Lithium Complex |
| Worked Penetration @25°C, after 60 Strokes, 0.1mm units, ASTM D217 | 238 |
| Penetration change after 1,00,000 strokes, ASTM D217 | Shall not differ from worked 60 strokes by more than 10 units |
| Drop Point, °C, ASTM D2265 | 230 |
| Viscosity of Base Oil @ 100°C, cSt, ASTM D445 | 14.5 |
| Viscosity of Base Oil @ 40°C, cSt, ASTM D445 | 160 |
| Copper Strip Corrosion, ASTM D4048 | Negative |
| Four-Ball Weld Load, kg, ASTM D2596, Min. | 280 |
| Four-Ball Wear Scar Diameter, ASTM D2596, mm | 0.42 |
| Timken OK Load, ASTM D2509, kg | < 45 |
Due to continual product research and development, the information contained herein is subject to
change without notice.