Motorman Underbody
Motorman Underbody
Motorman Underbody is Anti-Corrosive compound for underbodies of all automobiles.
It forms effective barrier against corrosion caused by ingress of water and withstands impact
from Flints, stones, tar, mud, or any other matter liable to be thrown up from the road.
Motorman Underbody is a top quality underbody coating material specially developed for
applying with a paint brush or Spray gun.
Protects the car reliably against rust, road salt, water, ice and snow.
Motorman Underbody underbody protection has excellent corrosion resistance (in acc. with
DIN 53210SS, salt spray test 200 hours), excellent adhesion and excellent wear resistance.
The product is elastic and has excellent anti-noise properties.
Effective protection against heat and cold. Can be used between 5C and 40C.
Cannot be painted over. Touch-proof after approx. 5 hours, dry hard after 24 hours.
Application fields are underbodies and wheel houses of field cars, lorries, caravans, tanks,
boats etc. Does not require primer.
Thanks to a thick, elastic layer, the vehicle is permanently protected against mechanical and
chemical agents.
| Colour | Black |
| Uniform applicability | by brush or by spray gun |
| Coverage | 10 meter Sq./ kg |
| Dry Film thickness per coat | 40-60 microns |
| Flash point | 90 Deg.C |
with wire brush. Wash the surface. Stir in the can thoroughly before use.
Carefully tape over all areas that are not to be treated.
Apply a coat on dry prepared surface with a brush or spray gun
Do not use on engine, gears, brake parts and exhaust pipes.
Drying time:
Completely dried after 24 hours
Touch-proof after approx. 5 hours
Remove any splashes on the car body immediately with a cloth soaked in petrol or white
spirit
After use, clean the tools and can thoroughly with solvents and dispose off properly.
Do not use near naked flame as it is inflammable. Replace the lid tightly after use. Do not
mix any thinner. Store in a dry place and away from sources of heat.
