Motorman Wire Rope Compound Moly
Motorman Wire Rope Compound Moly
- It reduces friction between two or more wires moving over each other.
- It protects wires against corrosion in abusive environment. It lubricates inside wires and
exterior surfaces and displaces moisture thus inhibiting rusting. It ensures longer life of wires. - It penetrates inside wire strands and intra wire stresses are minimized reducing chances of
rope breakage from inside. - It seals the wires from outside to protect it from seepage of moisture in the core and fretting
corrosion. - It is fortified with Molybdenum Di Sulphide for Antiwear, High Load Carrying performance
and water displacing additives in homogeneous stable state. - It is translucent in texture enabling technician
- Can be applied with brush on wire rope. Stays in position after application without run down.
- Free from abrasive grit, clay, chlorides, moisture and other impurities.
- Compatible with all other lubricants used in rope.
- Resistant to significant age embrittlement.
- Non toxic for humans.
| CHARACTERISTICS | TYPICAL VALUES |
| Appearance | Smooth Semi fluid |
| Base | Inorganic Thickener |
| Colour | Greyish Black |
| Solids Lubricant | Molybdenum Disulphide (about 4%) |
| Specific Gravity @ 20°C | 0.90 ± 0.05 |
| Drop Point | None |
| NLGI Consistency | 00 |
| Base Oil Viscosity @ 40°C | 420 – 480 cSt |
| Water Resistance | Good |
| Copper Strip Corrosion | Negative |
| Special Additives Antifungal | H2 S Inhibitor |
| Temperature Range | -20° C to 150° C |
| Wear Scar (mm) | 0.50 max |
| Oxidation Stability (psi) 100°C | 99hrs |
